- LIFT PLUS -
Pump Lift Station Stock Control Panels

Applications

• Standard control panels for pump applications
• Remote control panels for Pump Lift Stations
• Perfect for waste collection, transfer to waste treatment, rinse water and wash water applications
• Pressurize open loop flows
• Control for pumps in process liquids or waste streams
• Panels for collection & transfer requirements with a small footprint

Standard Features

• Single (Simplex) and Dual (Duplex) pump panels
• Single phase or three phase power
• NEMA 4X fiberglass, hinged door, enclosures
• Relay control
• All wires marked and color coded for simple maintenance
• HOA switches for auto or manual operation
• Indicator lights for pump on condition
• UL rated disconnects and fuses

Options

• Communications – telephone dialer, Ethernet, etc.
• High level alarms with a local junction box (note1)
• Level control & leak detection alarms for double containment option (note1)
• Wireless communication interface
• Starter options: NEMA, VFD (variable frequency drive) or soft starter
• Alarm horn with silencer
• Strobe/flashing alarm light
• UL label if required
• Lead/lag alternating control relay (only with Duplex pump options)
• Special power requirements

Note1 – This option includes an audible horn with push button silencer, a remote alarm signal contact, an alarm light, and necessary sensor(s).

Operation
 

• Simplex
  - Single pump unit
  - High level – pump on
  - Low level – pump off

• Duplex
  - Double pump unit
  - High level – second pump on
  - Low level – first pump on
  - Low Low level – pumps off

1. 110 Vac, 1-phase, 60 Hz power connection (see note 1).
2. NEMA-4X enclosure, including:
   (1) Pump HOA switch.
   (1) Pump running indicating green light.
   (1) Power supply for level switches.
   (1) Pump start/stop relay, (max, rating, 1hp @ 25 amp)
   (1) Pump control relay.

Note: Maximum current required: Approx. 15A for 1 HP motor

1. 110 Vac, 1-phase, 60 Hz power connection (see note 1).
2. NEMA-4X enclosure, including:
   (2) Pump HOA switch.
   (2) Pump running indicating green light.
   (1) Power supply for level switches.
   (1) Pump start/stop relay, (max, rating, 1hp @ 25 amp)
   (1) Pump control relay.
   (1) Lead/lag alternating control relay

Note: Maximum current required: Approx. 15A for 1 HP motor (30A total)

1. 230 VAC, 3PH, 60 Hz power connection, with 460 VAC, 3PH, also available by adding -460 to the part number.
2. NEMA 4X enclosure
3. (1) Pump HOA switch
4. (1) Pump running indicating green light
5. (1) Alarm strobe red beacon
6. (1) Alarm indicating red light
7. (1) Audible alarm buzzer and silencer switch
8. (1) OPTIONAL Overload pump indication light (add $87.00)
9. (1) Power supply for level switches
10. (1) Pump motor starter
11. (1) Pump control relay

1. 230 VAC, 3PH, 60 Hz power connection, with 460 VAC, 3PH, also available by adding -460 to the part number.
2. NEMA 4X enclosure
3. (2) Pump HOA switch
4. (2) Pump running indicating green light
5. (1) Alarm strobe red beacon
6. (1) Alarm indicating red light
7. (1) Audible alarm buzzer and silencer switch
8. (2) OPTIONAL Overload pump indication light (add $152.00)
9. (1) Power supply for level switches
10. (2) Pump motor starters
11. (2) Pump control relays
12. (1) Lead/lag alternating control relay

Wastech's CDS Chemical Dispense Station or Glycol Feed System automatically dispenses metered amounts of any chemical on demand, including viscous fluids. It comes with a NEMA 4X control panel with ON/OFF, HOA switches and a fused receptacle. It is fully wired with all piping, a check valve, pressure switch, and isolation valve. Standard features include a 15, 30, 55, or 100 gallon tank with hinged cover, and a 5.5, 8.5, 12 or 20 GPH automatic metering pump.